Lutron LED Dimmer is a great choice for you to have at your home if you don’t want the same intensity of light all day.
You will need to ensure that you can efficiently control how bright your light is during different times.
These dimmers allow you to choose between several preset modes, and you can also change the brightness of light according to your own convenience and choice with great ease.
So, if you’re looking for a similar performance from your unit, then Lutron LED dimmers might just be for you.
Lutron LED Dimmer Buzzing
Although these dimmers are pretty great with overall efficiency, and there are no major issues on them, you might get some buzzing sound coming from these dimmers that can get annoying.
These issues are sometimes related to wattage, compatibility, and hardware problems. You will have to go through quite a few pointers to get the system fixed.
So, if you are getting such buzzing sounds and that makes you worried about it, here are a few ways to get it fixed.
1) Check the Compatibility
The buzzing is produced when there are higher current spikes between the bulb and your dimmer, and that can cause vibration within the dimmer, causing you to have a buzzing sound.
Now, this buzzing sound can vary based on what shape or model of the dimmer you might be using.
While Lutron dimmers are the best ones out there and second to none, you also need to make sure that you are getting the right dimmer that would be compatible with your bulb.
There is a whole list of compatible bulbs and LEDs on the Lutron website, so you need to ensure that both the bulb and dimmer are compatible with each other to ensure a smooth experience without any buzzing sounds.
Though, the problem can still remain if it is not due to the compatibility issue. Once you have made sure that you are good at compatibility, you will need to move forward with other troubleshooting steps, such as.
2) Check your wattage
You also need to check if your voltages are being regularized and if there are no issues with them. Higher Voltage can cause a spark that will result in the buzzing, and it can be dangerous as well.
It is optimal to have a voltage meter installed at every circuit, let it be at home or the office, to avoid any short circuits and stuff like that.
3) Check your Wiring
Another thing that you must keep a keen eye on is your wiring. You will need to ensure that you are using the right ratings of wire that can take the current for your light and dimmer and don’t create a spark.
A corroded, damaged, or disconnected wire can also cause you to have a buzzing sound on your dimmer, so get an electrician down your place who will be able to run a check and rule out the possibility of the wiring.
4) Check the Dimmer
Since they are pretty durable, chances are very thin for your dimmer to go bad under any conditions.
So, once you have checked on all the other possibilities that can cause you to have the problem, it is time you get your dimmer checked as well, and this will optimally solve the problem for good.
5) Check the Load On The Circuit
At this point, you need to check up on the load that is put on the circuit. If the load on the circuit is a bit excessive, you will not be able to get anything out of the system.
The excessive voltage flowing through the system will just create more problems, like the buzzing noise coming out of the unit.
So, all that you need to do is to check the load on the circuit and then go about fixing the issue accordingly.
It can be a bit of a hassle to isolate these issues sometimes, and your best bet is to limit the current flowing through the circuit.
The more reasonable solution here would be to call an expert to help you limit these issues.
You might not have the tools or the expertise to manage the electrical connections, and you will end up electrocuting yourself in some situations.
So, to limit these issues, you need to check up on the load and then go about fixing the system accordingly.
Hopefully, you will not have to deal with more hassle down the road, and you will get a consistent response.
6) A Stabilizer Will Help
The stabilizer can also help you a great deal here, and you can easily narrow down the power-related issues by installing a stabilizer.
This will help you get rid of issues with the power surges and will also maintain a stable flow of power.
All that you need to do is to install the power stabilizer and then go about fixing the issue accordingly.
It might be a bit heavy on your budget, but you will not struggle to get a consistent response out of your system. So, be sure to keep that in mind and then install a stabilizer to limit these issues.
Hopefully, you will not have any hassle here, and fixing the unit will come pretty easily to you.
It all comes down to how you’re planning on navigating the issue, and purchasing a stabilizer might just be the right move for you.
7) Try A Different Bulb
Here, you should focus more on the type of bulb you’re using. Sometimes, even when the power is optimal, the bulb is a bit too heavy on the circuit.
You should move towards purchasing a smaller bulb for your unit, and that will be much easier on you when it comes to managing the power flow.
Ideally, all errors will be addressed right here, and you will not have to deal with more complications.
There is no harm in testing out a new bulb, and you can also ask the dealer to point you in the right direction.
You can’t expect every bulb to work well with the dimmer. So, be sure to keep that in mind and test out a new lighting solution.
As long as it matches the power requirements from the dimmer and the circuit, you will not have to struggle with more errors down the road.
8) Call Lutron Support
Seeking help from the official support team is not a bad idea either, as these experts are always ready to help you through the intricate details of the issue.
You will not be able to fix the unit yourself in every situation, and having an expert to help you through each step is not a bad idea.
All you have to do on your end is to call up the company support line and explain your issue. If the issue is with the dimmer’s hardware, then you will not be able to fix it yourself.
So, be sure to get some help from a professional, and he will make your job much easier.
It all comes down to how you’re planning on navigating the issue, and claiming the warranty will help you get a fresh piece.
Claiming the warranty can be a hassle at times, but you can provide the dealer with valid proof of purchase. That will be more than enough to speed up the process.
Even if you’re not sitting on a valid warranty, you can get more pointers from the experts after explaining your situation.
That way, it will be easier to figure out the exact issue, and then you can go about fixing it accordingly. Hopefully, you will not have to go through all this hassle and the unit will be fixed easily.
Wrapping Up
Struggling with Lutron LED Dimmer buzzing? Here are some pointers that can help you get an optimal response from the system.
It will only take a bit of effort on your end to isolate these issues. So, be sure to check up on the wiring situation and the voltage supply.If you’re lucky, the situation will be as simple as reinstalling the dimmer.
However, if the issue is a bit more severe with the dimmer not being compatible with the system, then you will have to get a new one that is compatible with this system.
Similarly, you can also check on the wiring status as well as the circuit to isolate these issues. You will not have to worry about these errors when the load on the circuit is optimal, and the wiring is in good shape.
So, be sure to keep that in mind when you can’t seem to get a response out of your unit.Lastly, you should also engage the Lutron dealer to limit these issues.
If the issue is with the system hardware and you’re not that sure about the damages, then you need to demand a fresh piece.
Depending upon your claim, it will not be that difficult to get the new piece from the dealer.
