Roku Error Code 014.30 - Easy Fix Guide (2024)

The highlight of this write-up will be on Roku error code 014.30 and a possible way to fix it.

In recent times, Roku has become popular as one of the preferred media players which give its users satisfaction.

Despite the good feedback, users have also complained about Roku error code 014.30 as seen on their screen as a result of unreliable network connections.

This error usually occurs due to poor internet connection or absence of network at all especially as you try to stream your preferred movie or shows.

Also, this may happen if you mistakenly enter the wrong username or password as you try to log in to your Roku account.

Furthermore, this might also indicate that there is a corrupt router DNS cache or there is an error during the launch configuration, especially on the TV.

Cause of Roku Error Code 014.30

Poor Internet – Most users experience this error at the point of streaming with their Roku devices or in between their streaming sessions.

Also, it occurs when there is a poor internet signal from the service providers.

Hence, it will be impossible for the Roku device to perform effectively.

Fragile Wi-Fi Signal – Some Roku devices get access to the internet through Wi-Fi, hence the wireless signal needs to reliable for effective streaming to take place.

However, as you move away from the router, the signal gets week while it gets disconnected as the distance between the wireless and Roku device becomes too wide.

TV Configurations – At times your television might not be configured as it is supposed to thereby leading to this error.

Apart from this, there might be issues with the software of your television especially when it misses essential files that are needed for the functionality of the system.

Invalid Password/SSID – As you try to set up your Roku connection, it is possible to type the wrong SSID password for the Wi-Fi connection.

This in turn results in a glitch as the system tries to establish an internet connection.

So this can trigger the error code as well as 014.40.

Fixing Roku Error 014.30

Fixing this error is generally easy despite it being triggered by factors you can’t control.

The recommended solutions are;

Use another device to test your Wi-Fi network – When this error occurs, you can test your network with either your computer or phone.

However, ensure the internet is stable before you.

Alternatively, you can reach out to your ISP for inquiries.

Make use of Roku Remote – If you’re still experiencing challenges after testing the network, try using the remote.

On your Roku remote, move to setting section, tap on system.

From the menu, tap on the system restart.

Check if the issue has been resolved.

Also, you can as well check the network connection on your remote.

Use the following steps;

• From settings on your remote, select Network.
• Tab on setup connection then chooses Wireless.
• Choose your network, enter your unique password.
• Finally, select connect. This will establish a successful connection.

Reboot Your Modem – You still need to reboot your modem and reset your wireless signal.

This can help rectify the problem.

Update Your Software – If the error still shows, it might be your Roku needs a software update.

Follow the steps below;

• First, connect the Roku to a different Wi-Fi network or use your Ethernet cable to connect to the router.
• Once connected, navigate to the settings and tap on update software. You’ve to be patient and allow the update to finish, then reboot.
• After the update, you need to disable the network pings.
• Next, connect Wi-Fi network. At this point, once the pings

In Conclusion

By carefully trying all the recommended solutions stated above, you’ll be able to clear error code 014.30.

For users that have also experienced this error especially those with punctuation and symbols as their password, it will be advisable to change the password removing any symbols.

If it still did not work, you can reach out to customer support for more guild line on how to solve the error.

Frequently asked questions

What does error 014 designates on Roku?

This is one of the common errors Roku users can experience.

This means that the device is struggling to establish an internet connection via the Wi-Fi network.

In addition, it also means an error in the software update.

What is the consequence of error code 014.20 on Roku?

Whenever Roku player finds it difficult to join any local network, there is every tendency 014.20 will pop up.

Most times when this happens, the Roku device is far from the router which weakens the signal strength.

Hence, it’s important to shift the router closer to the device before restarting both the device and the router.

What does error code 014.50 signify on Roku?

Whenever a Roku device struggles to link to an existing local network, error code 014.50 pops up on the screen.

The implication is that when the Wi-Fi network is selected and the correct key codes entered, the device will still be unable to link to the local network.

What’s the possible way of getting an activation code for Roku?

Once the activation code sent to you expires, you’ll need another code.

To get it, press the start button from your Roku remote to generate another code.

After the verification of the code, follow the instructions displayed on the screen to proceed with the remaining sign-up process.

What is preventing the Roku code sent to me from working?

If you’ve tried and still unable to receive an activation code from Roku, it’s better to reboot your Roku device together with a wireless router.

In doing this, it’s better to make use of another Wi-Fi network or mobile hotspot.